Abdolahi, Mehdi
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017, Pages 369-381]
Abdolkhani, Ali
The Effect of Chemical Pre-treatment of Industrial Waste of Licorice Root on its Pulp Structural Properties in Bio- Refinery Concept [Volume 32, Issue 4, 2017, Pages 518-529]
Abdulkhani, Ali
Improvement of adhesion strength of polyurethane and alkyd coatings by nano-silane using sol-gel method [Volume 32, Issue 3, 2017, Pages 322-333]
Abidnejad, Roozbeh
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017, Pages 47-56]
Afsoni, Fatemeh
Evaluation the mechanical properties of medium density fiber board of domestic production and imported with help of vertical density profile, infrared rays, Spectroscopy and imagine analyses (case study of Arian Sina Co) [Volume 32, Issue 1, 2017, Pages 145-156]
Ahmadi, Hossein
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017, Pages 131-144]
Ahmadi, Mohammad
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017, Pages 94-105]
Ahmadi, Mohammad
The effect of recycling process on the chemical properties and wettability of obtained fibers from MDF wastes [Volume 32, Issue 4, 2017, Pages 553-564]
Akbari, Mina
The effect of water softening calcium carbonate on the fluting paper properties from OCC and NSSC [Volume 32, Issue 1, 2017, Pages 118-130]
Alizadeh, Maliheh
Numerical and experimental establishment of kiln drying schedule for Iranain beech based on diffusion theory [Volume 32, Issue 4, 2017, Pages 486-497]
Asadi, Amin
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017, Pages 369-381]
Ashrafi Rad, Bagher
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
Azadfallah, Mohammad
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
Azadi, Mehrnaz
Study of side effects of Thiophanate-methyl fungicide on aesthetic and structural properties of paper [Volume 32, Issue 2, 2017, Pages 261-274]
B
Bagheri, Ali reza
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017, Pages 473-485]
Barazandeh, Mohammad Mahdi
Evaluating the Rate Equation of Delignification Reaction of Populus deltoides [Volume 32, Issue 1, 2017, Pages 25-32]
C
Chaalaakeh, Raahil
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017, Pages 498-508]
Chabavizadeh, Javaher
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017, Pages 131-144]
D
Dadashi, Esmaeil
Evaluation the mechanical properties of medium density fiber board of domestic production and imported with help of vertical density profile, infrared rays, Spectroscopy and imagine analyses (case study of Arian Sina Co) [Volume 32, Issue 1, 2017, Pages 145-156]
Dadashi, Saeid
Evaluation the mechanical properties of medium density fiber board of domestic production and imported with help of vertical density profile, infrared rays, Spectroscopy and imagine analyses (case study of Arian Sina Co) [Volume 32, Issue 1, 2017, Pages 145-156]
Dalvand, Mosayeb
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017, Pages 171-180]
E
Ebrahimi, Ghanbar
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017, Pages 171-180]
Eisapor, Reza
Investigation and compare the tensile strength of hardwood dowel joints, made by glue and welding [Volume 32, Issue 3, 2017, Pages 382-391]
Eisapor, Reza
Investigating the effect of diameter and dowel surface in softwood joints, made by welding and glue [Volume 32, Issue 4, 2017, Pages 598-605]
Emadi, Mehdi
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017, Pages 205-214]
F
Fakhryan, Abbas
Evaluating the Rate Equation of Delignification Reaction of Populus deltoides [Volume 32, Issue 1, 2017, Pages 25-32]
Faraji, Farshid
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017, Pages 576-584]
Farokhpayam, saeid reza
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017, Pages 402-410]
Fathi, Shadabeh
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017, Pages 13-24]
G
Ghorbani, Maryam
Effect of thermal modification on physical and mechanical behavior of sunflower-polypropylene composites [Volume 32, Issue 3, 2017, Pages 392-401]
Golbabaei, Fardad
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017, Pages 450-461]
H
Haghighi Poshtiri, Azar
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017, Pages 300-310]
Hajihassani, Reza
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017, Pages 1-12]
Hajihassani, Reza
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017, Pages 450-461]
Hajjarian, Marzieh
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017, Pages 181-192]
Hasani Khorshidi, Fatemeh
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017, Pages 205-214]
Hedjazi, Sahab
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017, Pages 576-584]
Hejazi, Sahab
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017, Pages 94-105]
Hemmasi, Amir Homan
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017, Pages 193-204]
Hosseinihashemi, Seyyed Khalil
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017, Pages 422-435]
Hosseinzadeh, Omid
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017, Pages 181-192]
I
Ibaghi esfahani, Hamid
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017, Pages 157-170]
Izadyar, Soheila
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
J
Jahan Latibari, Ahmad
The effect of moisture content and storage time of Bagasse on particleboard physical and mechanical properties [Volume 32, Issue 4, 2017, Pages 541-552]
Jahan - Latibari, Ahmad
The influence of compounding process on the properties of polypropylene-cellulosic fiber nanocomposite containing nanoclay particles. [Volume 32, Issue 2, 2017, Pages 287-299]
Jahan- Latibari, Ahmad
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017, Pages 47-56]
Jahanshahlou, Sobhan
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017, Pages 227-237]
Jalali Torshizi, Hossein
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017, Pages 215-226]
Jalali Torshizi, Hossein
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017, Pages 498-508]
Jalali-Torshizi, Hossein
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Jamalirad, Laya
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017, Pages 576-584]
Jonoobi, Mehdi
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017, Pages 300-310]
K
Kalagar, Mehdi
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017, Pages 157-170]
Kargarfard, Abolfazl
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017, Pages 251-260]
Kargarfard, Abolfazl
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017, Pages 462-472]
Kargarfard, Abolfazl
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017, Pages 450-461]
Karimi, Ali Naghi
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017, Pages 300-310]
Kazemi Najafi, Saeid
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017, Pages 1-12]
Ketabi, Ehsan
The impact of truss structure on stiffness by finite element method [Volume 32, Issue 1, 2017, Pages 69-82]
Khademi Eslam, Habibollah
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017, Pages 411-421]
Khalilian Shalamzari, Mysam
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017, Pages 509-517]
Khazaeyan, Abolghasem
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017, Pages 359-368]
Khodaparast, Sina
The influence of compounding process on the properties of polypropylene-cellulosic fiber nanocomposite containing nanoclay particles. [Volume 32, Issue 2, 2017, Pages 287-299]
Khosravani, Amir
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017, Pages 227-237]
Kolaei Moakhar, Fatemeh
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
Kor, Fereshteh
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017, Pages 576-584]
L
Lashgari, Amir
The impact of truss structure on stiffness by finite element method [Volume 32, Issue 1, 2017, Pages 69-82]
M
Madhoshi, Mehrabi
Numerical and experimental establishment of kiln drying schedule for Iranain beech based on diffusion theory [Volume 32, Issue 4, 2017, Pages 486-497]
Mahdavi, Saeed
The effect of moisture content and storage time of Bagasse on particleboard physical and mechanical properties [Volume 32, Issue 4, 2017, Pages 541-552]
Mahdavi, Saeid
Evaluating the Rate Equation of Delignification Reaction of Populus deltoides [Volume 32, Issue 1, 2017, Pages 25-32]
Mehdikhah, Seyyed Abbas
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017, Pages 83-93]
Moezzipour, Bita
The effect of recycling process on the chemical properties and wettability of obtained fibers from MDF wastes [Volume 32, Issue 4, 2017, Pages 553-564]
Mohammadi achachlouei, Mohsen
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017, Pages 131-144]
Mohammadi achzchluei, Mohsen
Study of side effects of Thiophanate-methyl fungicide on aesthetic and structural properties of paper [Volume 32, Issue 2, 2017, Pages 261-274]
Mohebi, Behbood
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017, Pages 1-12]
Mosavian, Said amir
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017, Pages 369-381]
N
Naijian, Fatemeh
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Navi, Parviz
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017, Pages 1-12]
Nazari, Latif
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017, Pages 422-435]
Nikkhah Dafchahi, Mostafa
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017, Pages 585-595]
Nourbakhsh, Amir
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017, Pages 450-461]
Nourbakhsh, Amir
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017, Pages 334-344]
O
Omidbakhsh Amiri, Elham
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017, Pages 565-575]
OMRANI, PANTEA
Investigation and compare the tensile strength of hardwood dowel joints, made by glue and welding [Volume 32, Issue 3, 2017, Pages 382-391]
OMRANI, PANTEA
Investigating the effect of diameter and dowel surface in softwood joints, made by welding and glue [Volume 32, Issue 4, 2017, Pages 598-605]
P
Pirayesh, Hamid reza
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017, Pages 509-517]
Pirmoradian, Kamal
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Porbar, Samira
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017, Pages 181-192]
Pourmousa, Shademan
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017, Pages 83-93]
Pourtahmasi, Kambiz
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017, Pages 171-180]
R
Rahmaninia, Mehdi
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017, Pages 227-237]
Rahmaninia, Mehdi
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
Rajabi Cham Heidari, Hosseinali
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017, Pages 436-449]
Rasooly Garmaroody, Esmaeil
The Effect of Chemical Pre-treatment of Industrial Waste of Licorice Root on its Pulp Structural Properties in Bio- Refinery Concept [Volume 32, Issue 4, 2017, Pages 518-529]
Rasooly Garmaroudy, Esmaeil
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017, Pages 215-226]
Resalati, Hossein
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Resalati, Hossein
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017, Pages 585-595]
Rezvani, Mohammad Hadi
Influence of Chemical Modification with Polycrease ECR on the Functional Performance of Poplar wood Polymer [Volume 32, Issue 1, 2017, Pages 33-46]
Rezvani, Mohammad Hadi
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017, Pages 436-449]
Rodi, Hamid reza
The Effect of Cationic – Anionic Starch Multilayers Formation upon CMP Fibers on Pulp and Paper Properties [Volume 32, Issue 1, 2017, Pages 57-68]
Rodi, Hamid reza
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017, Pages 215-226]
Rodi, Hamid reza
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Rohnia, Mehran
The influence of compounding process on the properties of polypropylene-cellulosic fiber nanocomposite containing nanoclay particles. [Volume 32, Issue 2, 2017, Pages 287-299]
Roohnia, Mehran
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017, Pages 13-24]
Roohnia, Mehran
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017, Pages 47-56]
S
Sadat nia, Mahammad ali
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017, Pages 509-517]
Saeidi, Hasibeh
The Effect of Cationic – Anionic Starch Multilayers Formation upon CMP Fibers on Pulp and Paper Properties [Volume 32, Issue 1, 2017, Pages 57-68]
Salehi, Kamiar
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017, Pages 94-105]
Salimifar, Mohammad reza
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017, Pages 311-321]
Samariha, Ahmad
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017, Pages 411-421]
Sanei, Ehsan
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017, Pages 402-410]
Sepehridad, Hossein
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017, Pages 157-170]
Shakeri, Alireza
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017, Pages 359-368]
T
Tajdini, Aghang
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017, Pages 83-93]
Talaei, Aisona
Influence of Chemical Modification with Polycrease ECR on the Functional Performance of Poplar wood Polymer [Volume 32, Issue 1, 2017, Pages 33-46]
Talaei, Aisona
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017, Pages 436-449]
Tarmian, Asghar
Improvement of adhesion strength of polyurethane and alkyd coatings by nano-silane using sol-gel method [Volume 32, Issue 3, 2017, Pages 322-333]
Torabi vostikulaee, Iman
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017, Pages 565-575]
V
Varamsh, Akbar
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017, Pages 369-381]
Vaysi, Ramin
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017, Pages 275-286]
Vaysi, Ramin
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017, Pages 311-321]
Vaysi, Ramin
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017, Pages 473-485]
Y
Yahyavi, Mostafa
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017, Pages 359-368]
Z
Zafari sarmori, Mohammad
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017, Pages 402-410]
Zamaninasab, Soheila
The effect of the type of chair connection on the stress distribution and structural failure by to finite element method [Volume 32, Issue 1, 2017, Pages 106-117]
